Search our warehouse

Labconco XPert Filtered Balance System

$5,900.00

Labconco XPert Filtered Balance System

$5,900.00

The XPert Filtered Balance System (Cat # 3971301) provides user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and exhaust HEPA filter mounted in the upper plenum take up less space than a separate exhauster would require, and isolation supports minimize blower vibration. RXPert Single Filtered Balance Systems are Class I biological safety cabinets designed for drug compounding and manipulation of pharmaceutical ingredients. They meet the USP <800> requirements for non-sterile compounding when ducted and include a factory-installed canopy and damper for thimble ducting to the outside. Their true bag-in/bag-out HEPA filter disposal system provides safe filter replacement.

Since HEPA filtered air is returned to the laboratory, these vented balance enclosures offer the added benefit of low installation costs and require no ducting to the outside. Interior dimensions accommodate large micro and analytical balances. Containment-enhancing features ensure that potent powders frequently found in pharmaceutical, dry chemical, mold and asbestos weighing operations are kept away from the operator.

This system has hardly been used and is in premium condition. It is being offered at around half the cost of a new one.  The system comes with a 60-day warranty, stainless steel work surface, and a telescoping base stand.

  • Standard 60-day warranty

Features:

  • Deep 23″ interior to accommodate large micro and analytical balances
  • Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
  • Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
  • True bag-in/bag-out filter disposal system
  • Built-in blower with vibration-isolated motorized impeller
  • Intrinsically-safe, negative pressure design
  • Minihelic pressure gauge
  • Space-saving design. No separate filtered exhauster is required.
  • Upper diffuser screen
  • Quiet operation from 48-66 db(A) depending on airflow
  • Glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle.
  • Pre-wired fluorescent lamp and switches for blower and light
  • Speed control
  • 1/4″ thick tempered safety glass front sash and sides
  • Ergonomic 10 degree angled and hinged sash that pivots upward, locks for loading and has a wiping seal to contain contaminants
  • Two utility ports
  • Conformance: ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010
  • Sash Opening Height: 9.4" (23.9 cm)
  • Work Surface: Stainless steel
  • Lighting: Fluorescent lights
  • Exhaust Volume (CFM): 220
  • Air Usage/Static Pressure with Sash At Working Height: At 60 fpm, exhausts 130 CFM at .37 – .43" H2O static pressure. At 80 fpm, exhausts 175 CFM at .53 – .62" H2O static pressure
  • Electrical: 100 – 115V; 60 Hz
  • Dimensions of Enclosure: 36 in (wide) x 28 in (deep) x 42 in (high)
  • Manufacturer: Labconco

Create Inquiry

Labconco XPert Filtered Balance System